MOBILE 60 CONCRETE BATCHING PLANT TECHNICAL SPECIFICATIONS
All of our products are CE certificated and covered with 2 years’ warranty
FREE OF CHARGE ASSEMBLY & TRAINING IS INCLUDED IN THE PRICE.
1- AGGREGATE STORAGE HOPPER :
Volume: 40 m3
No of compartments: 4 x 10 m3
Body Material: St 37 – 5-6 mm, bended sheet.
No of Discharging Gate: 4
Discharging Gate Control: Electro-pneumatic
Gate Cylinders: 800 x 300 mm, BRAND: REXROTH
Main body is reinforced against deformation.
Sand compartment vibrator: 2 pcs, 0.37 kW
Vibrator Brand: OLI (Origin: Italy), Model: MVE 300/3
Air accumulator is present.
Maintenance platform on both sides are present.
Grill is not included (optional item)
2 - AGGREGATE WEIGHING HOPPER:
Weighing Capacity: 1 m3
Body Material: St 37 – 5 mm sheet metal
Vibrators: 1 pcs, 0.37 kW,
Vibrator Brand: OLI (Origin: Italy), Model: MVE 300/3
Equipped with loadcells: 4 pcs, 5.000 kg/each,
Brand: ESIT
Double connection both with fastener and chain
3- AGGREGATE TRANSFER CONVEYOR :
Conveyor Sizes: 800x 12.000 mm
Chassis Material: NPU 200 steel profile
Electric Motor: 15 kW, 1500 rpm, GAMAK Brand, Efficiency class: IE3. Gearbox Brand: PGR, heavy duty type. Bearings and housings: FAG or SKF Brand. Belt rubber: Thickness: 10 mm, Quality EP 160, number of layers: 4,
Belt rubber brand: BANTSAN. Emergency stop button is present. Drive Drums: Ø320 mm, 5 mm thickness. Drive Drums are coated with rubber. Walking platform on both sides and covering are present. Roller stations are galvanized. Impact rollers are used in area which is subject to dynamic load of aggregate discharging from the hopper.
4- MIXER: SINGLE SHAFT TYPE
Dry Filling Capacity: 1.500 lt
Compacted Concrete Capacity: 1.000 lt
Mixer Motor: 37 kW, 1450 rpm (EMTAŞ or equivalent Brand – Turkey), Efficiency class: IE3. Gearbox: Heavy duty type, (DİŞSAN or equivalent Brand – Turkey). Bottom and Side Liner Plates and Mixing arms in Anti-Wear HARDOX 450 sheet (SSAB – SWEDEN) or XAR 500 (GERMANY), thickness 15 mm,
minimum hardness 450 HBW;
5- CEMENT WEIGHING HOPPER
Weighing capacity: 600 kg Hopper material: St 37 – 4 mm Cement is discharged by means of a butterfly valve with pneumatic actuator control. (WAM or OZB Brand) Connection with the mixer is done by flexible hose. Equipped with load cells, 3 pcs, 1000 kg/each. (Brand: ESIT) Vibrator: 1 pcs, 0.18 kW, (Brand: OLI - ITALY), Model: 200/3
6- WATER WEIGHING HOPPER: HOT DEEP GALVANIZED
Weighing capacity: 300 lt
Hopper material: St 37 – 4 mm
Water is discharged by means of a butterfly valve with pneumatic actuator control. (WAM or OZB Brand)
Equipped with load cells, 3 pcs, 1000 kg/each.
(Brand: ESIT)
7- ADDITIVE WEIGHING HOPPER: HOT DEEP GALVANIZED
Weighing capacity: 30 lt
Hopper material: St 37 – 4 mm
Water is discharged by means of a butterfly valve with pneumatic actuator control.
(WAM or OZB Brand)
Equipped with load cells, 1 pcs, 100 kg. (Brand: ESIT)
8- MOBILE CHASSIS
Chassis Material: NPI 300 and NPU 250 mm Steel Profile Discharging height: 4.2 meters Walking Platforms, handrails and ladders are GALVANIZED All of the mixer and weighing hoppers are accessible and in accordance with CE standards. 2 axles and 4 tyres are present on the chassis. Main trailer is connected to the truck by means of king pin (2.5 inch diamater)
9- AUTOMATION SYSTEM:
The plant is fully automated and the system is controlled on PC.
Automation system includes:
* Power panel and control panel
* PLC (SIEMENS or SCHNEIDIER Brand)
* Software
* Computer, Screen and Plotter
* Electronical components are SIEMENS and SCHNEIDER Brand.
10- CONTROL CABINET:
Located on the chassis of the plant
Walls are made of 40 mm isolated sandwich panels. 9000 BTU Air conditioner is present.
11 - AIR COMPRESSOR:
Compressed Air Volume: 300 lt.
Brand: TAMSAN, Origin: TURKEY
Type: Piston compressor with belt drive
Body: GG-26 Casting
Motor Power: 3 kW
Maximum Air Pressure: 8 Bar
12a- CEMENT SILO: EXTERNAL TYPE
Type: Fully bolted for easy transport.
Capacity: 75 Tonnes (Other options are possible) Cone sheet material and thickness: St 37 - 6 mm Body sheet material and thickness: St 37 – 4-5-6 mm Roof sheet material and thickness: St 37 – 4- mm
Charging Pipe: Ø 114 mm
Deck ladder from bottom to the top is present.
Silo roof is surrounded by handrails according to CE norms.
Main body is reinforced by NPU steel profile.
Silo legs are long enough not to require to build concrete legs.
Silo is equipped with air system for filter and air nozzles.
12b - CEMENT SILO: INTERNAL TYPE
Internal type cement silo is located on the mobile plant body for full mobility.
Capacity: 26 Tons
Body material and thickness: St 37 – 5 mm
Roof material and thickness: St 37 – 4- mm
Charging Pipe: Ø 114 mm
Silo roof is surrounded by handrails according to CE norms. Silo is equipped with air system for filter and air nozzles.
13- SCREW CONVEYOR:
Sizes: Ø 219 x 8.000 mm
Motor: 9kW
Brand: WAM or OZB
14- SILO TOP FILTER : OPTIONAL TOGETHER WITH SILO
Surface area: 18 m2
3 solenoid valves with pneumatic washing is present.
Air consumption 4,5 Nmc/h
Brand: WAM or OZB
15- SAFETY VALVE, LEVEL INDICATORS, SILO ACCESSORIES
Pressure Relief Valve at the top of silo is present.
Level Indicators are present for controlling cement level in the silo: 2 pcs, for max and min levels.
Butter fly valve with manual lever is present at discharging gate of silo.
Air Nozzles with air installation is present.
Silo Accessories Brand: WAM or OZB
16- AGGREGATE PRE-FEEDING CONVEYOR
Aggregate pre-feeding systems are our alternative solutions to the loading ramps which are necessary for charging the hoppers by loaders. In case of using of aggregate prefeeding conveyors in our concrete batching plants, loading ramp construction for loaders
does not require. Thus the jobsite infrastructure investment and also oil consumption for loaders are minimized. Our pre-feeding systems can be used in all types of our concrete plants.
Hopper Capacity: 10 m3
Conveyor Dimensions: 800 x 18.000 mm
Motor Power: 22 kW
Detailed Images
You can see many different images below. For mor images please visit our webpage www.constmach.com
Packing&Shipping
MOBILE 60 mobile concrete plant has the features of being able to have all necessary equipments for concrete production, even a cement silo is located on a single wheeled mobile chassis on and this offers easy transportation and rapid installation advantages to its users. Overall dimensions of MOBILE 60 are determined according to international road transport regulations and it is transported between jobsites easily.
Plant Drawing
After Sales Service
Constmach After Sales Service
All our products are guaranteed for 2 years and after sales we provide all kinds of spare parts for our customers. In addition to
physical support, our full automatic concrete plants are reached through internet connection and some of the problems can be
resolved easily.
Company Introduction
CONSTMACH is the leading concrete plant and crusher manufacturer of Turkey with more than 100 working plants in over 50 countries. USA, France, Spain, Holland, UK are some of the countries that our products are used.Cement silos, sand screening and washing plants, mobile crusher are other product types which are manufactured by CONSTMACH.
Our Services & Strength
CONSTMACH is a customer-focused, team-centered and process-managed company and commitment to customer relationships is primary.. ISO 9001:2015 Quality Management System Certificate and CE Certificate of our products are the main indicators of our quality policy.
Title goes here.
Semi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding Machine
PET Bottle Making Machine is suitable for producing PET plastic containers and bottles in all shapes.
Title goes here.
Semi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding Machine
PET Bottle Making Machine is suitable for producing PET plastic containers and bottles in all shapes.
