When mixing a heavy load in a twin-shaft mixer, the tremendous torque of the mixer shafts tend to twist the mixer body – it squirms slightly. 16 years of experience in these mixers has shown that this squirming can twist the shaft seals and bearings out of line, causing excessive wear over time. The extra-stiff frame and added box-sections along the body of the mixer help the MAO to hold its shape even with full loads of extreme mix designs, such as in concrete for dam applications, resulting in longer life of bearings and shaft seals. Longer life with less down-time.
Everything is subject to modification without prior notice. For specific requests, we will refer to our technical department. Values indicated are not applicable in all applications and conditions and are subject to variations depending on the use and quantity of the product.